The Dreambox DM5600,DM7000

info and Pictures

 
 

                      Dreambox tester board    Dreambox board

                                      Remote Info (pdf file)

Back

NOKIA 9610

E-mail

 
 

 

DreamBox DM7000

Also as PDF file: Here

 Technical data
DBS dBS-Tuner:
Incoming frequency range 950.... 2150 MHz
Input level range - 65 dBm... - 25 dBm
Noise level 12 railways max.
DBS dBS-Tuner entrance F - socket
Feed impedance 75 ohms
AFC capture range +/- 3 MHz
Demodulation Shaped QPSK
Symbol rate 2... 45 Mbaud/s, SCPC/MCPC
FEC Viterbi and Reed Solomon
Viterbiraten 1/2, 2/3, 3/4, 5/6, 7/8, automatic adjustment
Roll off Factor 35 %
Demultiplexing: in accordance with ISO 13818-1
Common interface
Common interface card location for CI modules
Current consumption max. 0,Á/5V per module
Smartcard interface
2 x Smartcardinterface for embedded DreamCrypt and protection of children and young people
Video decoding:
Video compression Mpeg-2 and Mpeg-1 compatibly
Video standard PAL G/25 cycles per second
Display format 4: 3/16: 9
Pictorial material 16:9, automatic adjustment for 16:9 TV devices (over SCART)
Type character box filtering for 4:3 TV devices
Audio decoding:
Audio compression Mpeg-1 & Mpeg-2 Layer I and II
Audio mode dual (main/sub), stereo
Sampling rates 32 kHz, 44,1 kHz, 48 kHz, 16 kHz, 22,05 kHz, 24 kHz
Audio parameter:
Exit similar:
Output level L/R 0.5 V
Output impedance 600 ohms
THD > 60 railways (1 kHz)
Cross talks < - 65 railways
Exit digitally:
Output level 0.5 Vss at 75 ohms
Sampling rates 32 kHz, 44,1 kHz, 48 kHz
SP/DIF exit optically (AC3)
Video parameter:
Input level FBAS 1 Vs-s +/- 0,3 railways at 75 ohms
Teletext filtering according to ETS 300,472 standard
Tv-scart:
Exit: FBAS with RGB or only FBAS or only s-video home system adjustably
Vcr scart:
Entrance: FBAS with RGB or s-video home system
Exit: FBAS or s-video home system
Serial interface R-S 232:
Type R-S 232, bi-directional
Bit rate of 115.2 kBit/s max.
Plug connector D-SUB-socket, 9 polig
Function update for system software and pre-programming
Ethernet:
100MBit, bi-directional
Function update for system software and pre-programming
Mini DIN:
I2C for the controlling of external devices (option rotor price increase)
IR functions send/receive
UDMA66 IDE interface:
Internally for port HDD max: 500mA
arbitrary size
Compact Flash - readers
LNB current supply:
LNB river 500 mA max.; short circuit proof
LNB tension vertical < 14,0V without load, > 11.5 V with 400 mA
LNB volume-meets horizontal < 20 V without load, > 17.3 V with 400 mA
LNB disconnection in the Standby mode
Number of active satellite positions:
DiSEqC 1,0/1,2 SAT POSITION/SAT OPTION
DiSEqC - rotor control
Current supply:
Capacity:
< 20 W (in enterprise, horizontal polarization/400 mA LNB river)
< 11 W (in enterprise, without LNB)
< 2 W (Deep Standby mode)
Input voltage:
180 V.... 250 V/50 cycles per second of alternating voltage
General:
Ambient temperature +15°C... +35°c
Air humidity < 80%
Dimensions (B x T x H): 380 mm x 260 mm x 60 mm
 

 


 

DreamBox DM5600

Features:

 - 250 MHz IBM PowerPC Processor (350 Mips)

 - Linux Operating System

 - 2 x DVB Common-Interface Einschub

 - 1 x Smartcard-Reader

 - MPEG2 Hardware decoding (DVB kompatibel)

 - Common available NIMs (DVB-S, DVB-T, DVB-C)

 - V.24/RS232 Interface

 - 4-digit 7-segment display

 - Up to 64 MByte of RAM

 - unlimited channel lists for TV/Radio

 - channel-change time < 1 second

 - full automatic service scan

 - supports directly bouquet-lists (indirect unlimited)

 - supports EPG (electronic program guide)

 - supports videotext (insertion)

 - supports multiple LNB-Switching control (supports DiSEqC)

 - fully adaptable OSD in many languages (skin-support)

 - SPDI/F Interface for digital bit stream out (AC-3 / DTS)

 - RF - Modulator and Video-Out Chinch

 - 2 x Scart-interfaces (fully controlled by software)